Cyclone Blowjob Simulator – 360° Rotating Masturbator

A Cup That Turns Both Ways

Strokers ask you to do the work. This one does not. Inside the housing a 360° cup rotates around you – clockwise for a while, then it catches and reverses, and the change of direction is the part you actually feel. Four rotation patterns and three speeds stack into twelve combinations, and they are genuinely different from one another rather than the same motion at louder volumes. The canal is molded with tongue-like ridges that drag as the cup turns, which is the whole trick: a hand can go up and down, but it cannot go around.

Size, Sleeve and Build

8.03″ end to end with 4.92″ of usable depth, at three quarters of a pound – substantial in one hand without becoming a two-handed project. The shell is hard ABS so the motor has something to push against, and the sleeve inside is soft TPE that pulls out completely. That detachable sleeve matters more than it sounds. It is the difference between a toy you clean properly and one you quietly stop using after a month.

Let It Do the Work

Warm the sleeve under the tap first – a minute is enough, and it changes everything about the first few seconds. Slide in, thumb the rotation on low, and then stop moving; that is the part people get wrong. The cup turns one way, catches, and turns back the other, and the ridges inside do something a hand cannot do at all. Work up through the speeds when you are ready, or leave it low and let it take twenty minutes. Grab a bottle of water-based lube with it – this one is thirsty.

Key Features

• 360° rotating cup – turns clockwise and counterclockwise, and reverses under load.
• 4 rotation patterns x 3 speeds – twelve combinations from a slow turn to a hard spin.
• Tongue-like ridged canal – textured the full depth, not just at the opening.
• 8.03″ total, 4.92″ insertable, 0.75 lb – one-handed.
• Detachable soft TPE sleeve in a rigid ABS body – comes out for cleaning.
• USB rechargeable – charging cable included.

Care and Cleaning

The white inner sleeve pulls out, and that is the only part that goes near water. Rinse it with warm water and mild, fragrance-free soap or a toy cleaner, then let it air dry completely before you put it back in – trapped moisture inside the housing is what kills these. Wipe the ABS body with a damp cloth and keep the charge port dry; there is no waterproof rating, so never submerge the motor. TPE is porous and cannot be fully sterilized, so keep it to one person, store it cool and dry and out of direct sunlight, and plan on replacing the sleeve periodically. Water-based lube only – silicone lube degrades TPE.

Why Buy It Here

SpicyGear has been shipping privately since 1996. Every order goes out in a plain, unmarked box with no logos and a discreet billing descriptor on your statement, free over $75 in the USA, backed by a lowest-price guarantee. Browse the rest of the toys for men, or pick up water-based lube while you are here – you will want it.

Frequently Asked Questions

How is this different from a regular stroker?
A regular stroker moves up and down because you move it. The Cyclone rotates around you instead, in both directions, with a ridged canal that drags as it turns. It is a motion a hand cannot make.

How much of it is insertable?
4.92 inches of the 8.03 inch total length. It weighs about three quarters of a pound, so it sits comfortably in one hand.

Is it waterproof?
No. The inner sleeve pulls out and can be rinsed, but the motor housing and charge port must stay dry. Never submerge the body.

How do I clean it?
Pull the white sleeve out, rinse it with warm water and mild soap or a toy cleaner, and let it air dry completely before reassembling. Wipe the outer body with a damp cloth. TPE is porous and cannot be fully sterilized, so store it dry and replace the sleeve periodically.

Do I need lube?
Yes, and water-based only. Silicone lube degrades TPE. A rotating sleeve uses more than a manual stroker does, so keep a full bottle nearby.