Master Series Ass Rattler Weighted Inflatable Anal Beads

Two Steel Balls Under Silicone

Most anal beads are hollow, and you feel them as shape. These are not. Each of the two balls carries a steel core under a smooth silicone skin, so at 3.6 oz they register as weight before they register as anything else – a low, constant downward pull that follows you around the room. The slim flanged base sits outside on a cord, which is what makes long sessions possible.

They Get Bigger After They’re In

Deflated they measure 5.1″ insertable at 1.2″ across, which is a size most people can take without much ceremony. From there the bulb pump takes the widest point out to 2.8″ and the insertable length to 8″. That is more than double the girth, and the whole range is yours to move through at whatever pace you want. If you already know 2.8″ is where you want to end up, our large and huge butt plugs get there without the ramp.

The Hose Comes Off

This is the part that separates it from most inflatables. Once you have pumped to the size you want, the hose detaches and the pressure holds – no tube trailing out of you, no bulb to keep track of, nothing tethering you to the edge of the bed. When you want it gone, the built-in quick-release valve lets you drop the pressure fast or bleed it off slowly, which is a genuinely different sensation from letting go all at once.

Weight Is The Other Half Of It

Inflation gives you width; the steel gives you gravity. Once they are inside and inflated, the balls pull gently downward with every step and every shift of position, pressing against the A-spot or the P-spot depending on how you are built. That pull is constant and it does not need you to do anything – which is why this one rewards wearing over using. The pressure sits there and colours everything else you do.

How To Get It Right

Use far more anal lube than feels necessary, and insert one ball at a time rather than both together. Once both are seated, inflate slowly and stop at the first point that feels like enough – 2.8″ is a substantial width and there is no prize for reaching it. Deflate completely before removal, every time. Never pull against inflated beads, and stop immediately if you feel numbness, sharp pain, or pins and needles. Silicone and PVC both take water-based lube only.

The Weight Of It

You get them in easier than you expected – one, then the other, and then a pause while your body decides how it feels about that. Then you start pumping, and somewhere around the fourth squeeze the word “full” stops being abstract. You detach the hose. Nothing is holding you to anything now, and you stand up, and the steel remembers gravity before you do. You will feel it every time you move for as long as you leave it in. Add it to your cart and see how long that is.

Why Buy It Here

We have been doing this since 1996. Everything ships in plain, unmarked packaging with a discreet billing descriptor, shipping is free over $75, and there is a real person on the other end if something goes wrong. We also list the full measurements – including which number is the hose and which is actually going inside you – because that distinction matters and plenty of sites bury it.

How much do they actually expand?
From 1.2″ to 2.8″ at the widest point, and from 5.1″ to 8″ of insertable length. The overall 28.75″ figure in the specs is the hose, not the insertable portion.

Why does the hose detach?
So you can move freely once you are inflated. Pump to the size you want, remove the hose, and the beads hold the pressure until you use the quick-release valve.

How heavy are they?
The plug alone is 3.6 oz, from the steel cores inside each ball. That weight creates a constant downward pull that you feel with every change of position.

Can I wear them for a long time?
The slim flanged base and cord are built for extended wear. Start with shorter sessions to learn how your body handles the weight, deflate before removing, and stop if you feel numbness or discomfort.

What lube and how do I clean them?
Water-based lube only – silicone and oil lubricants damage both the silicone and the PVC hose. Wash with warm water and mild soap, spray with a toy cleaner, and let it air dry fully before storing.